If you would like
to obtain a quote from a reliable, licensed, bonded, local contractor to
assist in your building projects, access: Local
Interesting Stuff - Did You Know?
smell of aromatic cedar for the short term by lightly sanding
with a 180 or 220 grit sand paper. Also, an aromatic cedar
extract is marketed as a restorer for just such purposes in several
of the woodworking supply catalogs.
plywood veneer thickness is about 1/36" before sanding or
roughly the same thickness of 4-5 sheets of normal copy paper.
doors may warp during the fall and winter seasons when the home
heating systems are in use. The heat will dry the air causing
a temporary wood imbalance resulting in warpage. Using a
humidifier will add moisture to the air to alleviate this temporary,
Density Fiber Board (MDF) is an excellent product for cabinet doors.
It is a good substrate for hardwood veneer due to its smooth surface
and uniform thickness, and it can be easily machined. Used without a
veneer, it can be painted. In either case, it has good screw holding
characteristics, and is often used as cabinet door material. MDF is
heavy and larger doors will require additional hinges.
solid floor planking over a cement base. First, install
3/4" plywood panels as a sub-floor base; then nail the solid
flooring strips to the plywood. Solid flooring should never be
glued to a concrete sub-floor.
Quality Woodworking Tools and Information,
For Great Router
More FREE Plans!
Picnic Table Plans
Gun Rack Plans
Free Rockler Catalog!
Hard-to-find items & Rockler Exclusive items for the home
and the shop!
Table-levelers, custom blades, hardware, and tools - a great